Why does my print keep failing and clogging

I got an elegoo neptune 4 plus, i am using orca slicer, PLA, and in the past 2 days, my printer keeps clogging. I got 2 extruders and in both, the same situation happens, where i need to disassemble the hot end and use a heatgun to remove the filament.

I have even switched the nozzles and put new ones.

I know that on this pictures you can clearly see i need to adjust my z offset (since i was costantly switching etxruders and do a quick auto level and even auxiliary leveling) but I've had prints that start great, the z offset is perfect, but then messes up. It is always on the first layer, and it always messes up in the third or fourth object printed, which is weird. Even if i rearrange the objects and no matter the location, it messes up on the third or fourth object.

I have tried it with a clean plate, i have tried it with glue on the plate, i bave tried different temperatures, to no avail.

I thought it was a wet filament issue, so i opened a brand new filament to test it and it happened again. Also i put these filaments on my bambulab A1 after it fails on the neptune, and they print normal. * The occasional popping sounds on the video is not the filament, it is the extruder trying to load the filament but failing and it "jumps" back"